ESSEGI SYSTEM SERVICE s.r.l. (Италия)
Сейчас остро стоит вопрос оплаты за товары переводы по SWIFT происходят с «трудностями». Банки берут комиссию за перевод, хранения валюты на счете. Есть возможность оплачивать ваши инвойсы через иностранные торговые дома или сервисы оплаты услуг:
Адрес фирмы импортера ESSEGI SYSTEM SERVICE s.r.l.
Адрес нашего офиса ESSEGI SYSTEM SERVICE s.r.l.: ИТАЛИЯ, Via Zambon 14, 36051 Creazzo (VI), Italy
Надежные компании по перевозкам из Италии в Россию
ГК ИМПОРТР: Услуги по перевозке грузов из Китая, Таможенное оформление, Юристы, Авиаперевозки грузов, Аутсорсинг ВЭД https://import-v-rossiu.ru Консультация онлайн: Олеся
Электронная почта: [email protected]
Евгений Демин
- Проводим сравнительный анализ по 5 поставщикам в вашей нише;
- Не берем % с каждой поставки, передаем контакты, чтобы вы могли работать с поставщиком напрямую;
- Считаем маржинальности поставки из Китая в сравнении с закупкой в России;
- Проверяем надежность поставщика по уникальной схеме.
Прямая доставка грузов контейнерами из Азии (Китай, Ю.Корея, итд)
Вы можете рассчитать стоимость морской доставки прямым рейсом из основных портов Китая, Кореи и других стран в порт Владивосток
Разрешительная документация для РФ (Сертификация продукции)
Для ввоза продукции в Таможенный союз (ТС) в частности Россию, необходимо получить разрешительные документы в частности декларацию соответствия ТР ТС. Стоимость декларации 9000 рублей, возможно вам потребуются Протоколы Испытаний
Так же для законной продажи продукции ЕСЕГИЙ СИСТЕМ СЕРВИС срл вам так же потребуется декларация.
⁉️Вам скорее всего потребуется оформить временный ввоз продукции для предоставления образцов продукции.
Таможенное оформление товаров
Для быстрого прохождения таможни вы можете обратиться к специализированным брокерам или подготовить весь комплект документов самостоятельно для ввоза на территорию ТС из Италии
- Внешнеторговый договор со всеми приложениями
- Инвойс / invoice (оригинал) + перевод Proforma или Commercial
- Телекс либо счет подтверждающий стоимость транспортировки
- Страховой полис
- Паспорт сделки при сделке свыше 50 000$
- Упаковочный лист (packing list)
Сроки доставки из Италии от 3х дней
Если вам необходим доставить не большую партию груза с помощью авиаперевозки сроки доставки 3-5 дней. Стоимость доставки 5$ за 1 кг груза. При доставке больших грузов. Например с помощью мультимодальных грузоперевозок, вы можете доставить груз по цене 50 центов за 1 кг. Сроки от 20 дней.
Essegi ISM 3600
New for 2016! Maximum capacity 3624 reels. Height of the reels freely configurable up to 88mm.
Exclusive advantage: no need to set up in advance the positions
With ISM Ultraflex 3600 you don’t need to pre-set the height of the inner positions to stock the components.
Maximum flexibility: all heights combinations
Heights configuration practically unlimited. Every tray has a range from a minimum height of 8mm to a maximal height of 88mm. The machine is able to dynamically manage the subdivision of the interior spaces just as occurs with a hard disk.
Features
New ESD 7″ tray: multiuse and with double storage capacity
Not only storage of JEDEC trays, but also of any other material and component that suits to its measures.
It doubles the storage capacity, because it’s able to handle the double reel, for a total of 3.624 positions as 7″ reels with 8mm height regards. If you don’t want to manage the selection of the reel output, the machine can be used with a single reel per tray.
Patented Fast Exit: loads and unloads up to 54 reels simultaneously
Fast Exit: ultra-fast exit system and extraction of the reels in a record time. It loads and unloads up to 54 reels simultaneously (multi-reel management).
Fast Exit: to extract the reel also during the loading / unloading phase
The multiple exit Fast Exit allows great flexibility of management. For example, when, in the load/unload stage, a reel is urgently needed and there is no time to wait for the operation to be finished.
The warehouse can interrupt the load/unload operation, provide with priority the component urgently needed, and then continue again with the load/unload.
Humidity control module Plug and Play.
Like all ISM models, also ISM UltraFlex 3600 can be equipped with the module for humidity control. The warehouse environment is always under control. Moreover, the humidity level is constantly below 5%
Accurate calculation of the “Floor Life”
Thanks to the ISM software, the expiration of each component is calculated and plotted with absolute precision. The software prevents to use components whose exposure period to humidity values higher than 5% has expired. In this way, the expired components can be quickly extracted from the warehouse and brought to the oven for the baking.
Specifications
More Productivity
SPEED ALONE IS NOT ENOUGH
In the last years, there has been a continuous race in order to accelerate the components mounting speed. Today there are machines. which are able to mount 65,000 components per hour. Nonetheless, this extraordinary speed is not sufficient to ensure the increase of the productivity.
YOU JUST NEED TO MAKE THE PHASE SUPPLY MORE EFFICIENT
Speed
STORAGESOLUTIONS INTELLIGENT STORES: FASTER. ZERO ERRORS.
- a) 27 reels in 15 seconds: recovery time’s record reduction. The machine prepares the stack of reels. The operator only has to open the door and to pick up the reels. Extraction time of a reel: from 12 to 15 seconds.
- b) No more human mistake. Because the management software identifies the right component.
- c) No more static positions of the components: even more efficiency. Unlike traditional Stores, the components do not have a fixed and determined position. They can be placed in any free position of the store. Even more time saving, even more efficiency.
- d) Automatic or semi-automatic: always fast. The advantages of the faster and zero errors management are found: in all the automatic stores (ISM 2000, ISM 3600, ISM 1100) in those semi-automatic (ISM 500 e ISM 400), thanks to the LED and acoustic signalizing system of the right components.
- e) Increased operator’s productivity. Another advantage: increased productivity of human resources. While the store selects and prepares the reels, the operator can do other jobs.
Space: something precious
In the economic management of a company, space is a fixed cost that always must be under control, with the increase of the production or by means of organizational changes. It is often necessary to increase the space, sometimes to even acquire new structures. In both cases, large investments are necessary.
GAIN SPACE. SAVE RESOURCES
No human mistake
“Reduction of the possibility of operator’s mistakes in the picking of the components, thanks to the elimination of paper, and the use of automated systems or alarms”
PICKING MADE BY OPERATORS: HIGHER MARGIN OF ERROR
The picking is a job that requires a lot of attention. Even if very expert, an operator can always go wrong: just relying on his memory and on the list with the locations of parts, the margin of error increases.
STORAGESOLUTIONS: ZERO ERRORS PICKING and INCREASE IN YOUR PRODUCTIVITY
MSD Traceability
“Controlled environment with humidity below the 5% e and total traceability for single code, thanks to the ISM software “.
HUMIDITY: THE NUMBER 1 ENEMY FOR MSD COMPONENTS
STORAGESOLUTIONS: humidity CONSTANTLY below 5%
CALCULATION OF THE “FLOOR LIFE”: ABSOLUTE PRECISION
NO MORE VACUUM BAGS.
Traceability
“Total control of the materials in the store and in the production line. Thanks to the ISM software, it is possible to integrate the stores to the production lines in order to know the exact quantity used for each component”
COMPLETE TRACEABILITY, TO PROGRAM WITHOUT WASTE AND ERRORS.
The ISM Software is a complete and powerful management tool. It allows you to integrate cabinets and machines.
ALL ADVANTAGES OF THE ISM SOFTWARE
YOU CAN EASILY APPLY IT TO ALL PROGRAMMS AND MACHINES.
Roi
“It quickly recovers your investment thanks to the significant reduction of costs related to the material handling and to setup preparation time. Moreover, you benefit from the increasing productivity of the pick and place lines”
Ultraflex Series
The automatic warehouses of Ultraflex series are the ideal solution for the storage and management of electronic production components.
They automate the receipt, archiving, traceability, picking from the warehouse and delivery to the production lines of the components necessary for electronic production with a decisive impact on the overall productivity of companies.
- They are super-compact, reaching a maximum height of 2.60 meters and a maximum width of 2.40 meters
- They are the only warehouses that manage and move the reels through a system of antistatic trays
- They are included with standard trays available in different sizes (from 7 “up to 15” configurable with different heights from 8 up to 88 mm)
- They come equipped with a kit of standard trays or can be customized to measure with quantities of customizable trays
- Internally, the spaces can be configured through customized design. A warehouse can contain: A warehouse can contain
- a mix of standard 7 “and 15″ reels trays (maximum capacity: 960 7 ” reels and 425 15″ reels)
- a completely customized mix of trays
Benefits
Thanks to the Patented Multiple Exit door, the preparation time of the kits for production and the time taken by the operator to store the material will no longer be a problem.
Extraction: 27 reels in 60 sec (operator time).Insertion: 54 reels in 60 sec (operator time)
Thanks to the QUICK EXIT door, it will be very simple to extract an urgent reel even during the loading and unloading phase of the warehouse. The operator can temporarily interrupt the loading / unloading operation in progress, ask the system to provide priority with the component that is urgently needed, and extract it from the quick exit.
The configuration of the heights of the trays is practically infinite. Each tray has a range that goes from a minimum of 8mm to a maximum of 88mm in height.
The warehouse is able to dynamically manage the subdivision of internal spaces just like with a hard disk and to allow the storage of trays of different heights quickly and automatically.
With Ultraflex series there is no need to pre-configure the height of the internal positions to house the componentsThe standard version of Ultraflex series has an extraordinary storage capacity.
It can manage a maximum of 3624 reels.Ultraflex series can contain not only reels, but also any other material and component that is suitable for the size of the trays (width from 7 “up to 15” for a maximum height of 88 mm).
Ultraflex series was created to be integrated with the different P&P lines (Juki, Fuji, ASM, Yamaha, Panasonic, Universal, Europlacer, Hanwa, Micronic, Essemtec) and with the many business systems (ERP or MES). Essegi Automation is able to provide powerful integration solutions to accelerate the achievement of the objectives of Industry 4.0 and make electronic manufacturing companies a real intelligent factory.
Thanks to the dynamic management of the components inside the warehouse, all the positions and sectors of the different units are used, without the possibility of leaving an empty space.
The components can be allocated to each movement in a different position without losing traceability. Simply put, ISM software finds a place for every single component and remembers exactly where it is.Ultraflex series stores components without the need for vacuum bags, because it is able to regulate and monitor humidity and maintain a constant internal environment below 5% relative humidity.
Thanks to a range of dehumidification options (dehumidifiers or FRUs, Fast Recovery Units) Ultraflex series is able to reduce humidity in a very short time even in conditions of high external humidity.
The ISM software is equipped with a control module that guarantees the monitoring of the “Floor Life” of each component: the expiry date and time are calculated and tracked with absolute precision. The system prevents the use of components whose period of exposure to humidity exceeding 5% has expired. Expired components can thus be quickly removed from stock.The system is able to collect images and data in real time thanks to the high precision cameras and software options that store and manage all the information collected.
It is possible to generate reports in real time that allow you to trace reels, labels, components and a lot of information related to the acceptance, logistics or production processes
The software is available with a full range of quick traceability consultations: serial number, code, date, location, product, supplier, deadlines and MSD status …
All images and data are saved in the database and it will be possible to consult or share them easily at any time.Ultraflex series is finished with antistatic paint. The housings are ESD certified and ensure that sensitive electronic components remain safe and are not damaged by electrostatic discharge.
Tower storage ultraflex 3600
With the essegi ISM 3600 storage solution the reels are marked up with a bar-codes that secures error free SMD handling for your upcoming job.
Learn more about the Storage Solution workflow >> click <<— Store 3620 7″ reels — in 70% less storage space.
About tower storage ultraflex 3600 — SMD Storage Solution
Storage Solution tower ISM 3600
Maximum capacity 3620 reels with 7″ reels
Height of the reels freely configurable up to 88 mm.
24″ Touch screen
Humidity control: Optional (HCU + FRU available)
Machine size: W 2,525 m x D 1,672 m
— Operative height: 2,48 m — adjustable feet 110 mm
— Transport height: 2,35 m